Sheridan Carter's Favorite No Sew Zone Method

There's lots of nuggets of information in this one. No sew zones can be created with less over stitching by using stop and tie off as the transition. Splitting the pantograph will give you a built in stop so you can add a no sew zone block inside the body of the quilt. Another option is to utilize the speed of your presentation clicker to stop IQ. This method allows you to back up and add the blocks. It's so much fun and very successful. Try it and see which is your favorite! Sheridan Carter is Representative for APQS and Intelliquilter. She teaches in her studio and travels to locations where teachers are not available.Reach out to discuss attending one of her classes. skquilts@gmail.com Public classes are listed on skquilts.com and private classes are.... well private.

Applique with a background fill of rays.

In this video I am adding a background fill of rays to an applique quilt. This is real time but because I am talking, I am going more slowly than I did for the rest of the quilt. I always say the name of the button I am touching so don't worry if you miss seeing me touch a button. 

iQ stitches rays so beautifully and they make a good background fill. My rays are spaced at 10º, but if a denser fill was needed, a rays pattern with smaller spacing could be made. You can find the instructions for creating ray patterns by choosing 'rays' in the right hand side menu here. Scroll down until you find the relevant post. 

Caballero Dahlia - An Urban Elementz video

We are utilizing the digital Caballero Dahlia pattern designed by Jessica Schick (available at urbanelementz,com) for the background Dahlia in this one of a kind quilt. Part II will conclude the digital quilting in the background. 

Note: where the clipping block mistake is made (and many of us have done that), at around the 48 minute mark, there is no need to back right out. Simply touching Cancel instead of Accept on the clipping confirmation page would have eliminated the clipping block and replaced all the missing designs. At that point add block > no-sew zone can be chosen.

IntelliQuilter Tutorial for No-Sew Zone, by Sheridan Carter.

Here's a fun tutorial for you to practice a no sew zone. Relax and enjoy the video as I take you step by step though a small quilt project. I chose a dense background which will really make the no sew zone pop! No sew zones are fabulous around applique or you may have an area that you need to avoid while stitching. That could be a bulky patch or part of a decoration and this will help you be prepared. Let's do this! Sheridan Carter is the owner of Sheridan Kay Quilting in Hendersonville, NC skquilts@gmail.com

Helen's iQ - Transitions for no-sew zones.

A talk about the different transition options for no-sew zones. This is another good test to run, if you haven't used no-sew zones or clipping blocks before, in order to find out how the different transitions stitch out and which you prefer. It's not necessary to do this every time you need a no-sew zone because once you understand the differences, you'll be able to decide which one is best for each no-sew zone you create.  These transition choices will also appear when a clipping block is created.

At about the 2:30 mark there's bit of skipping where I stopped to change my bobbin (poor planning on my part). It sounds as if you have missed something, but it was nothing important. I finished stitching the block without starting the recording again and that's why I used Close Block. At the 12:50 mark, I get into a loop by hitting the back button - I finally realise that hitting the cancel button is the right thing to do. You cannot hear me say that clearly, which is why I'm writing this.

No-sew zones in a pantograph on a large quilt.

No-Sew Zones in a Pantograph on a Large Quilt.
Note: this gives an overview with some steps included. These notes came from the handout from my class about no-sew zones so I was demonstrating these steps. My chatter would have included additional information. If you are new to iQ, then these notes may leave you with questions - don't hesitate to ask those questions on the Friends Using iQ facebook page. 

When there is an area on a quilt that you do not want to stitch over with an E2E pattern, a no-sew zone needs to be created.

First set up the pantograph as usual.

Once the quilt is mounted on the machine, align the quilt image with the real quilt by using the top left corner as the reference point.

When the area you do not want to stitch over is in the part of the quilt you are about to stitch, you need to create a no-sew zone using these steps:

Add/edit block > add block > standard block > trace or mark on quilt

I prefer to mark the block then later define it as a no-sew zone because I can see where I need to split the pattern and then modify it if possible. If I chose no-sew zone instead of standard block at this first stage, the pattern would be eliminated immediately.

Note: If you want to stitch in the ditch around the no-sew zone, you can do this manually as you mark the no-sew zone by lifting the motors and using trace on quilt.

Before going any further, zoom in to look at where the no-sew zone crosses over the patterns.  Does it cover the whole height of a row? Does it cover part of a row?

When the no-sew zone completely covers a pattern row, spilt the pattern anywhere within the block you have just marked. This will eliminate most of the transitions because it has turned one pattern into two.

Follow these steps to split the pattern. Finished > add/edit pattern > split pattern. Touch the pattern anywhere within the no-sew zone and then split.

When the no-sew zone only partially covers a row, you may still want to split the row so that it can be stitched from the no-sew zone outwards. Alternatively, you may decide that leaving the pattern complete will work better. Look to see if the pattern can be modified slightly to go around the no-sew zone. You may be able to eliminate parts and keep the pattern stitching without a transition.

This photo shows how I adjusted an E2E pattern to stitch around a no-sew zone.

                                          (Anne Bright’s Animal Friends Elephant)

Having split the patterns and perhaps modified them, follow these steps to complete the no-sew zone.

Add/edit block > add block > no-sew zone > touch the patterns that are going to be cut by the no-sew zone > continue > select existing block and touch the block you marked > continue > finished

Now choose the transition you prefer. If you choose continuous, smooth can be used to modify the transitions.  Pay attention to how the pattern will stitch around the edge of the no-sew zone – if there is a lot of backtracking or the pattern is dense; continuous may not be the best choice.

If you want to use smooth to modify the pattern, select continuous as the transition for the no-sew zone then when you get to the Design/Sew page, choose add/edit pattern > smooth pattern > touch the row you want to smooth > continue.

Grab the start point with the stylus and move it close to the no-sew zone. Grab the end point and drag it close to the no-sew zone.

Zoom into the pattern where it is cut by the no-sew zone. Touch smooth and then tap the + sign. Notice how it smooths the sharp corners of the continuous transitions.

 

The other transition choices are tie off and jump stitch. With either one you can eliminate some jumps or tie offs by changing the threshold.  The threshold is in inches – if you change it to one inch, IQ will stitch any distance between where the pattern enters and exits the no-sew zone that is less than one inch, as a straight line. It will jump or pause for distances greater than one inch.

Your choice of transition depends upon the pattern you are using and your preference.

Setting the transition to jump stitch clearly shows where the pattern is cut.

Once the transition is set, continue until you get to the design/sew page and select sew quilt.

Touch the pattern on the left side of the no-sew zone and make sure the start point is next to the no-sew zone. Continue. Touch the pattern on the other side of the no-sew zone and again make sure the start point next to the no-sew zone.  The machine will stitch away from the no-sew zone on both sides. This eliminates any risk of the end of the stitching overlapping into the no-sew zone

My preference is to sequence the whole quilt when sewing pantographs but when there are no-sew zones, it is better to sequence only the rows that can be can stitched in one pass. The no-sew zones will be marked as you come to them when stitching. This will mean that you will have to exit out of the sew quilt page back to add/edit block in order to mark the no-sew zones, so sequencing only the rows that are affected and about to be stitched is more efficient.

If there are multiple no-sew zones in one pass, stitch the patterns between the no-sew zones first then the patterns at the edges of the quilt.

If the no-sew area is larger than the exposed part of the quilt, mark-on-quilt as much of the no-sew zone as possible. Mark the side and top accurately but simply mark a straight line across the base, away from the last row to be stitched in that pass. When you select the patterns to be affected, only touch the rows that are about to be stitched. Do not touch the row that may have a partial no-sew zone.

This shows the stitching sequence for the two rows.

When you advance the quilt you’ll mark-on-quilt the next part of the no-sew zone. It probably won’t match up on the screen with the part of the no-sew zone that’s already marked but don’t worry. You’ve marked accurately, so it will stitch accurately.

Creating a no-sew zone

Erin demonstrates the steps to create a no-sew zone in this video. She is working in demo mode.

No-sew zones within a panto.

These two videos, produced by Shirley Higginbotham, teach setting up a pantograph, adding a no-sew zone around an embroidered area of the quilt, and adding a frame (circle) around the embroidered area of the quilt.

How to use a panto around embroidered blocks

Using The No Sew Feature With a Motif Pattern

Produced by: Linda Lawson

In these videos I show you how to place a background fill behind a motif in a block. I hope to have a pdf made to go along with this soon. The first 3 videos are showing how to fill around the outside of the block. The next 2 videos show my method for getting the fill to go inside an area of the motif.

Video 1 of 3




Part 2 of 3



Part 3 of 3



These next few videos are my method for filling the inside of the wreath that we are using in the previous videos.

Part 1 of 2



Part 2 of 2