How to Use This Blog

Since we have lots and lots of videos here, you will need to know the best way of finding what you are looking for. Each post has the video(s) of the topic it is about. Sometimes there will be more than one video that is a continuation of the previous one. These videos will be posted together within the same post. To find what you are looking for, either use the search box or the list of categories posted in the right column.


The IQ system is constantly evolving, so please keep in mind that some of the older videos may show features that have been replaced by newer ones, or buttons that have changed position or names. However, the videos have not been removed because the methods demonstrated are still valid.



Friday, August 21, 2015

Motor Auto Setup

Everyone is going to love this!  iQ can now set the motor engagement strengths itself. No more listening for the growl or watching the lift spindle, wondering if you have the strengths set too low or too high. After updating your software to the August 2015 version (8.20.15), use this feature. Make a note of your current motor engagement strengths then run the auto setup. Did iQ change them?

When you are just running this to set your motor engagement strengths, if your X motor is mounted at the front of your carriage, you need to push your machine close to the take up bar before running the X motor auto setup. If your X motor is mounted at the back of your carriage, bring your machine close to the front of the table before running the auto setup.

To watch the video on Youtube, go to this link: https://youtu.be/p1evl0yMgkA

No comments:

Post a Comment